6.13 Engaging the safety clutch for hook blockages
When the thread gets jammed in the hook track, the safety clutch
disengages.
Caution: danger of injury!
Turn off the main switch.
The safety clutch should only be engaged when the machine is turned
off.
–
Turn the handwheel until the safety clutch engages.
–
Turn the handwheel in the opposite direction until the hook is free.
–
If the safety clutch is still disengaged, insert a screwdriver (1) in
the opening (2). Then turn the handwheel until the safety clutch
engages.
–
Free up the blocked hook by removing the cause of disturbance.
2
1
GB
21