Hytronik HC419VRC/R Instruction Manual

INSTRUCTION MANUAL FOR MICROWAVE MOTION SENSOR
PRODUCT TYPE:
OPERATING VOLTAGE:
HF SYSTEM:
RATED LOAD:
(capacitive load)
DETECTION ANGLE:
POWER CONSUMPTION:
DETECTION RANGE:
TIME SETTING:
DAYLIGHT SENSOR:
STAND-BY PERIOD:
STAND-BY DIMMING LEVEL: 10%~30%
MOUNTING:
INSTALLATION HEIGHT:
WORKING TEMP.:
The sensor is an active motion detector; it emits a high-frequency electro-magnetic wave 5.8GHz and receives its echo. The sensor detects the change
in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command. Detection is possible through doors, panels
of glasses thin walls.
Note: the high-frequency output of this sensor is <0.2mW; approximately just 0.2‰ of the transmission power of a mobile telephone or the output of a
microwave oven.
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION AND RETAIN THIS LEAFLET IN A KNOWN
1.1 Ensure that the electricity supply is switched off before installing or servicing this product.
1.2 Wiring diagram
1 1 - 0 V SYNC
1-10V LED
LED Driver
HYTRONIK INDUSTRIAL LIMITED
Room D, 10/f, Tower A, Billion Center, 1 wang Kwong Road,
Kowloon Bay, Kowloon, Hongkong
T: 00852-35197525
E: info@hytronik.com
Model No.:HC419VRC/R

Technical Specifications

Microwave Motion Sensor
120-277VAC 50Hz/60Hz
5.8GHz CW radar
120VAC / 3.4A / 400W
230VAC / 3.5A / 800W
277VAC / 3.7A / 1000W
° °
30 ~150
<1W
Max. 16 meters in diameter, adjustable
5s~30min.
2~50Lux; disable
0s, 10s~1h, +
Indoors, ceiling & wall mounted
≤15M
-20 ~ +60 ℃
AND SAFE PLACE FOR FUTURE REFERENCE.

SECTION 1 INSTALLATION AND WIRING

F: 00852-30116936
Infrared remote receiver
Detection area
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
IMPORTANT
Wiring diagram for synchronization function
1 1 - 0 V SYNC
1-10V LED
Note: this 1-10V output is isolated, SELV output.Do not connect the
1-10V terminals on driver X to Driver Y.
CHINA FACTORY
3rd Floor, block C, complex building, 155#, Bai'gang road south,
Bai'gang village, Xiao Jin Kou town, Huicheng district, Huizhou 516023
Tel:86-752-2772020 F:86-752-2777877
E: info@hytronik.com W:www.hytronik.com
Sensor antenna
Buzzer
LED indication
+
Daylight sensor
L
1-10V
N
L '
SYNC
Push
SYNC
HC419VRC/R
1 1 - 0 V
LED Driver
ON/
Auto Mode
Reset
OFF
Power
SC1 SC2
+
100%
Scene mode
Dim
-
SC3 SC4 Power
80%
Detection range
100% 50% 10%
Stand-by dimming level Daylight Sensor
30%
10% 20% 2Lux
Test
5min
30s 1min 10Lux
2s
Hold-time
5min 10min 30min 50Lux
Installation hole
Lux
0s 10s 1min
Disable
Stand-by period
10min 30min M/A
HRC-05
SYNC
Max.10pcs
LED Driver
1-10V LED