Ducati Multistrada 950S 2019 Owner's Manual page 67

Riding mode change function
This Function allows changing vehicle Riding Modes
in static and dynamic conditions. There are four
possible riding modes: SPORT, TOURING, URBAN
and ENDURO.
To select the riding mode it is necessary to access the
specific Riding Mode Menu by pressing button (4) for
1 second.
The instrument panel displays the speed indication
(on the right) and riding mode name (on the left):
- SPORT
- TOURING
- URBAN
- ENDURO
One of these will be highlighted to indicate that it
was the last memorised setting and is currently in
use. The "EXIT" message is also present: if button (4)
is pressed when this application is selected, the
instrument panel will quit without memorising the
new riding mode.
For the highlighted riding mode some of the
parameter settings are displayed:
66
Engine High
Touring
DTC 4
Urban
ABS 2
Front Default
Sport
Rear Default
Exit
Pre-Load 16
Sport
DQS Off
- engine power (ENGINE): "ENGINE" message
followed by set engine power ("HIGH", "MED" or
"LOW");
- DTC system: the "DTC" message followed by the
level of intervention set ("1", "2", "3", "4", "5", "6",
"7", "8") in case the DTC is active or by "off" in
case the DTC is disabled;
- ABS system: the "ABS" message followed by the
level of calibration set ("1", "2", "3") in case the
ABS is active or by "off" in case the ABS is
disabled;
1
299
km/h
2 4
Fig 24