Ducati Multistrada 950S 2019 Owner's Manual page 120

You can use buttons (1), (2) and (4) to do the
following:
- use buttons (1) and (2) to highlight and select the
riding mode to customise, then press button (4)
to access the customisation page for the
selected riding mode;
- use buttons (1) and (2) to highlight and select
" Back", then press button (4) to go back to
previous page;
- use buttons (1) and (2) to highlight and select
"All Default", press button (4) to reset to default
values for all four Riding Modes.
The parameters linked to a riding mode that can be
customised are ENGINE, DTC, ABS, DQS,
Suspensions, Bike setup and DEFAULT (to reset
riding mode to default factory values). The following
indications will be displayed in this page:
-
Back
- Engine
- DTC
- ABS
- DQS
- Suspension
- Load Mode
Back
Engine
Sport
...
DTC
ABS
- Default (visible only if one or more parameters
are different from the "default" ones)
-
Back
Every time button (1) or button (2) is pressed, the
instrument panel allows scrolling all parameters of
the Riding Mode selected; once parameter is
highlighted, press button (4) to enter parameter
customisation page where you can edit the settings
of the parameter.
Any parameter change made is saved and remains in
the memory also after a battery-off. The parameters
1
2 4
Fig 55
119