Operation Overview - Transmitter; Front Panel Keys - ABB Navigator 500 Series Operating Instructions Manual

Navigator 500
Sodium analyzer
6 Operation overview – transmitter

6.1 Front panel keys

The transmitter is operated using the keys on the front panel. These enable local navigation and selection of software options on all
displays, acknowledgement and data logging and monitoring. Prompts associated with active keys are displayed on each screen.
Diagnostic messages are detailed in Appendix A.1, page 72, display icon descriptions are detailed in Section 6.10, page 40.
Fig. 6.1 Front panel keys
Key functions are described in the following table:
Key Function
Navigation key – left
A
and
Operator Level access key
B
View key
C
Up key
D
Down key
E
Group key
Navigation key – right
F
and
Cal shortcut key
Table 6.1 Front panel key functions / descriptions
OI/ASO550–EN Rev. G
Description
At menu level, selects the highlighted menu item, edit a selection or return to the previous
menu level.
When Operator page is displayed, opens or closes the Operator menu.
Toggles the view between Operator pages, Diagnostic View and Calibration Log screens.
. Not enabled in Configuration mode.
Note
Used to navigate up menu lists, highlight menu items and increase displayed values.
Used to navigate down menu lists, highlight menu items and decrease displayed values.
Toggles between:

Operator pages (1 to 5) when an Operator page is selected at the Group key.

View screens (Alarms, Outputs, Signals, Chart and Diagnostic) when the Diagnostic
View screen is selected at the Group key.

Log screens (Alarm, Audit, Diagnostic and Calibration) when the Calibration Log
screen is selected at the Group key.
. Not enabled in Configuration mode.
Note
At menu level, selects the highlighted menu item, operation button or edits a selection.
At Operator page level, used as a shortcut key to access the Calibrate level.
6 Operation overview – transmitter
29