Dispose of the old components in accordance with the guidelines contained in the Operating instructions (sodium OI/ASO550-EN or hydrazine OI/AHM550-EN). INF13/141–EN Rev. B | Navigator 550 | Hydrazine and sodium wet-sections | Flowmeter upgrade procedures (single-stream and multi-stream)
Page 3
Caution. Inlet tubing must be the specified length and type to ensure correct operation. 21. Re-introduce sample to the wet-section and check that the flowrate is displayed on the transmitter. Navigator 550 | Hydrazine and sodium wet-sections | Flowmeter upgrade procedures (single-stream and multi-stream) | INF13/141–EN Rev. B...
Page 4
4, page 3 for wet-section knock-out details Fig. 5.1 Flowmeter upgrade – hydrazine and sodium single-stream and sodium multi-stream wet-sections (sodium multi-stream wet-section shown) INF13/141–EN Rev. B | Navigator 550 | Hydrazine and sodium wet-sections | Flowmeter upgrade procedures (single-stream and multi-stream)
Page 6
We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.