Ul Approval For Simatic Cfu Diq Without Aluminum Housing (6Es7655-5Px31-1Xx0); Fm Approval For Simatic Cfu Diq Without Aluminum Housing (6Es7655-5Px31-1Xx0); Standards For Communication Connections; Safety Regulations And Special Requirements - Siemens SIMATIC CFU Commissioning Manual

12.1.2.4

UL approval for SIMATIC CFU DIQ without aluminum housing (6ES7655-5PX31-1XX0)

Table 12-6
Certificate number
Standards
Certificate number
Standards
12.1.2.5

FM approval for SIMATIC CFU DIQ without aluminum housing (6ES7655-5PX31-1XX0)

Table 12-7
Classification
Standards
12.1.2.6

Standards for communication connections

The components described satisfy the requirements of the following standards:
● IEC 61158
● IEC 61784
– The following applies for communication with the automation system over PROFINET:
12.1.2.7

Safety regulations and special requirements

The components described satisfy the requirements and criteria of the following standard:
SIMATIC CFU
Commissioning Manual, 08/2019, A5E39252870-AD
Underwriters Laboratories (UL) Certification
20190214-E248953
UL61010-1
UL61010-2-201
CAN/CSA C22.2 No. 61010-1-12
CAN/CSA C22.2 No. 61010-2-201:18
(COMPACT FIELD UNIT CFU DIQ) for use in Class I, Division 2,
Groups A, B, C and D Hazardous Locations
Factory Mutual Research (FM) Certification
Compliance to IEC 61784 Ed.2:2007 CPF 3/5
20190307-E223122
CSA C22.2 NO 213
UL 121201
NI, Class I, Div 2, Groups A, B, C and D
NI, Class I, Zone 2, Groups IIC
Class No. 3600
Class No. 3611
Class No. 3810
ANSI/ISA-61010-1
C22.2 No. 0-10
C22.2 No. 213-17
C22.2 No. 1010.1
CAN/CSA C22.2 No. 0.15-15
Technical specifications
12.1 General technical specifications
157