Digi-Sense TC9600 Advanced User Manual page 25

Ramp & Soak Mode Setup:
Screen # 6 - Setting Alarm Mode Variables
This screen reflects the variable settings for the selected alarm mode from screen # 5.

-Set Point—Process High
- Use UP/DOWN arrow keys to adjust the temperature value.
- When complete, press MENU key to advance to screen # 7.
- Set Point—Process Low
- Use UP/DOWN arrow keys to adjust the temperature value.
- When complete, press MENU key to advance to screen # 7.
- Set Point—Process High/Low
- Use UP/DOWN arrow keys to adjust the temperature value.
- Press the SELECT key to toggle between High and Low.
There will be a line below the active field.
- When complete, press MENU key to advance to screen # 7.
- Set Point—Deviation High
- Use UP/DOWN arrow keys to adjust the temperature value.
- When complete, press MENU key to advance to screen # 7.
- Set Point—Deviation Low
- Use UP/DOWN arrow keys to adjust the temperature value.
When complete, press MENU key to advance to screen # 7.

Set Point—Deviation High/Low
- Use UP/DOWN arrow keys to adjust the temperature value.
- Press the SELECT key to toggle between High and Low.
There will be a line below the active field.
- When complete, press MENU key to advance to screen # 7.
1.800.561.8187
25
www. .com
information@itm.com