Digi-Sense TC9600 Advanced User Manual page 22

ON/OFF Control Mode Setup:
Screen # 18 - Run Time
Use the UP/DOWN arrow keys to change the value.

Use the SELECT key to toggle between HR and MIN fields.

Run Time is a safety feature while the control is in the On/Off

or PID mode. The user can set a timer to have the output turned OFF if the time expires.
When complete, press MENU key to advance to screen # 19.

Screen # 19 - Power Failure Control
Use the UP/DOWN arrow keys to change the value.

Default value is STOP:

STOP — If the controller loses power while in the run mode,
it will not resume the process once the power has been restored.
RESUME — If the controller loses power while in the run mode,
it will resume the operating process once the power has been restored.
When complete, press MENU key to advance to screen # 20.

Screen # 20 - Advanced Menu Exit
Setup is complete.

Automatically will exit to the main operation screen.

1.800.561.8187
22
www. .com
information@itm.com