Mode Group, Channel, Program Operation, Reset Response (K1); Signals To Mode Group (Db11) - Siemens SINUMERIK 840D sl Function Manual

19.6

Mode group, channel, program operation, reset response (K1)

19.6.1

Signals to mode group (DB11)

DB11
DBX0.0 AUTOMATIC mode
Edge evaluation: No
Signal state 1 or AUTOMATIC mode is selected by the PLC program.
edge change
0 → 1
Signal state 0 or AUTOMATIC mode is not selected by the PLC program.
edge change
1 → 0
Signal irrelevant DB11 DBX0.4 (operating mode, changeover inhibit) = 1
for ...
Corresponding to ... DB11 DBX6.0 (active AUTOMATIC mode)
DB11
DBX0.1 MDA mode
Edge evaluation: No
Signal state 1 or MDA mode is selected by the PLC program.
edge change
0 → 1
Signal state 0 or MDA mode is not selected by the PLC program.
edge change
1 → 0
Signal irrelevant DB11 DBX0.4 (operating mode, changeover inhibit) = 1
for ...
Corresponding to ... DB11 DBX6.1 (active MDA mode)
DB11
DBX0.2 JOG mode
Edge evaluation: No
Signal state 1 or JOG mode is selected by the PLC program.
edge change
0 → 1
Signal state 0 or JOG mode is not selected by the PLC program.
edge change
1 → 0
Signal irrelevant DB11 DBX0.4 (operating mode, changeover inhibit) = 1
for ...
Corresponding to ... DB11 DBX6.2 (active JOG mode)
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
19.6 Mode group, channel, program operation, reset response (K1)
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Z1: NC/PLC interface signals
1601