Items Relating To Editing (Nos. 301 To; Items Relating To Editing (Nos. 301 To - Sony SRW-5800 Operation Manual

Items Relating to Editing (Nos. 301 to ...)

Item number Item
301 EDIT OPERATION
MODE
302 PREROLL TIME
303 POSTROLL TIME
304 VAR SPEED RANGE
FOR
SYNCHRONIZATION
305 EDIT FIELD select
166
Menu List
Setting Function
CG Selects the animation edit mode. For normal editing, use
[normal]
the "normal" setting.
KEEP DURATION CG: Primarily for recording computer graphics, this setting
normal: Use this setting for normal editing.
KEEP DURATION: This setting allows editing in certail
0 sec This sets the preroll time. The range is from 0 to 30
seconds, in steps of 1 second. The preroll time should
generally be set to at least 3 seconds, and for phase
[5 sec]
adjustment with an editing controller it is recommended to
set the preroll time to at least 5 seconds.
30 sec
0 sec This sets the tape running time after passing the OUT point
(postroll time) in automatic editing.
The range is from 0 to 30 seconds, in steps of 1 second.
[5 sec]
30 sec
[narrow]
Specifies the variable tape speed range when the variable
wide speed playback is executed by a remote control unit
connected to the REMOTE 1-IN(9P) connector.
narrow: –0.5 to +1 times normal tape speed (HDCAM-SR),
wide: –1 to +2 times normal tape speed (HDCAM-SR), –
Notes
• When this item is set to "narrow", variable speed
• When an editing control unit such as BVE-9100 is
[1F]
Selects the start timing for editing when performing tape
2F editing.
1F/2F 1F: Start editing from field 1 and end on field 2.
2F: Start editing from field 2 and end on field 1.
1F/2F: Following received timing commands.
Note
When the system of this unit is set to double-speed
recording, or when the system frequency of this unit is PsF
mode, the unit always operates with the 1F setting.
allows editing by individual frames. When the edit is
completed, the OUT point automatically becomes the
next IN point. The next OUT point is automatically set
one frame ahead of the IN point.
intervals. When the edit is completed, the OUT point
automatically becomes the next IN point. The position
of OUT point for the next edit is shifted automatically so
that the duration is the same as the previous edit.
–1 to +2 times normal tape speed (HDCAM), or –1 to
+3 times normal tape speed (Digital Betacam).
1.15 to +2.45 times normal tape speed (HDCAM), or –
1.15 to +3.45 times normal tape speed (Digital
Betacam).
playback is possible within the range of speed specified
for the respective formats.
connected for DT editing, select "wide".