Man D 28 Series Operator And Maintenance Manual page 524

Application and temperature range
Periodic
Lubricating vehicle door
lubrication......................
locks, outside handle..............
(continued)
(grease for lock barrels)
Operating temperature up
to 150 °C ................................
Gearbox input shafts,
propshaft joints and
intermediate bearings,
propshafts on eddy current
brakes, double cardan shafts,
eccentric shaft bearings on
fan tensioning pulley
Long-life lubrication: Rear
axle brake camshafts, brake
shoe pins.
Lubricating steering knuckle.
Greasing wheel bearings / hubs
(except hub unit), see page 48
Fifth wheel coupling................
(if not connected to central
lubrication or maintenance-
free)
Lifetime
lubrication
Wheel bearing units................
Grease fill: Wheel hub ..
Hub units = maintenance-
free; for repairs only
Initial fill service product in bold type.
SERVICE PRODUCTS / SPECIFICATIONS
Item name / specification
Fuchs RENOCAL FN 745/94 (MAN no.:
09.15004–0027) ........................................
Optitemp TT 1 (spray) (MAN no.:
09.15014–0024) ........................................
High-temperature grease
MAN 284 Li–H 2........................................
Multipurpose grease MAN 285 Li–PF 2 ....
High-temperature grease MAN 284 Li–H 2
Alternative specification
Water-resistant lubricating
grease, NLGI class 1/2, drop
point min. 120 °C
Lithium complex grease with
mineral oil, NLGI class 2,
NLGI class 2,
drop point min. 230 °C
Multipurpose grease (lithium-12-
hydroxistearate type)
+ EP additive package + MoS ,
2
NLGI class 2,
drop point min. 180 °C
Lithium complex grease with
mineral oil, NLGI class 2,
drop point min. 230 °C
WE/BEM - 53