Table of Contents
Advertisement
454 IN CASE OF EMERGENCY
2. Separate the connector holding the housing and wiring
harness to the body.
CHMSL Connector Location
3. Turn the desired bulb socket ¼ turn and remove the
socket and bulb from housing.
4. Pull the desired bulb straight from the socket.
CHMSL Bulb And Socket
CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily
surfaces. Shortened bulb life will result.
•Outside Bulbs: Cargo Lamps
•Inside Bulb: Center High-Mounted Stop Lamp
5. Reverse the procedure for installation of bulbs and
housing.
Hide quick links:
Advertisement
Table of Contents
