Table of Contents
Advertisement
2. Remove the connector bracket from the sill by pushing
inward in the locking tab.
Locking Tab
3. Disconnect the chassis wiring harness, ensuring the
connector bracket does not fall into the sill.
GETTING TO KNOW YOUR VEHICLE
4. Connect the chassis plug and bracket (provided in the
glove compartment) to the chassis wiring harness and
insert the bracket back into the sill.
5. Connect the tailgate plug (provided in the glove compart-
ment) to the tailgate wiring harness to ensure that the
terminals do not corrode.
6. Tape the tailgate harness and bracket against the
forward-facing surface of the tailgate. This will prevent
damaging the connector and bracket when storing or
reinstalling the tailgate.
145
2
Hide quick links:
Advertisement
Table of Contents
