Table of Contents
Advertisement
148 GETTING TO KNOW YOUR VEHICLE
2. Pull both clamp handles down to release the Tonneau
Cover's rear panel.
Released Position
3. From the released position, send the clamps to the
Stowed Position by pushing from the yellow bumper up.
Listen for a "clicking" sound to confirm the clamp has
been properly stowed.
Stowed Position
CAUTION!
Make sure the Tonneau Cover clamp and clamp wire are
in the proper stowed position. If the clamp and clamp
wire are not properly stowed, damage to the Tonneau
Cover material will result.
Hide quick links:
Advertisement
Table of Contents
