RAM 2500 2019 Owner's Manual page 220

218 SAFETY
• When FCW status is set to "Only Warning" prevents the
system from providing limited active braking, or addi-
tional brake support if the driver is not braking adequately
in the event of a potential frontal collision.
• When FCW status is set to "Warning and Braking" this
allows the system to warn the driver of a possible collision
with the vehicle in front using audible/visual warnings
and it applies autonomous braking.
• The system will retain the last setting selected by the driver
after ignition shutdown.
FCW Braking Status And Sensitivity
The FCW sensitivity and Active Braking status are program-
mable through the Uconnect System. Refer to "Uconnect
Settings" in "Multimedia" in the Owner's Manual for further
information.
• Far
•When the sensitivity of FCW is set to the "Far" setting
and the system status is "Warning and Braking", this
allows the system to warn the driver of a possible more
distant collisions with the vehicle in front using
audible/visual warnings.
• More cautious drivers that do not mind frequent warn-
ings may prefer this setting.
• Medium
•When the sensitivity of FCW is set to the "Medium"
setting and the system status is "Warning and
Braking", this allows the system to warn the driver of a
possible collision with the vehicle in front using
audible/visual warnings.
• Near
•When the sensitivity of FCW is set to the "Near" setting
and the system status is "Warning and Braking", this
allows the system to warn the driver of a possible closer
collisions with the vehicle in front using audible/visual
warnings.
•This setting provides less reaction time than the "Far"
and "Medium" settings, which allows for a more
dynamic driving experience.
•More dynamic or aggressive drivers that want to avoid
frequent warnings may prefer this setting.