Table of Contents
Advertisement
450 IN CASE OF EMERGENCY
Park And Turn Socket
4. Reach behind the headlamp and unlock the park and
turn socket from the lamp by rotating counterclock-
wise ¼ turn.
5. Pull the bulb straight out from the housing.
6. Separate the bulb from the socket without twisting.
7. Reverse the procedure for installation of new bulb and
covers.
Side Marker Lamp
1. Open the hood.
2. Disconnect and isolate the negative battery cable.
3. Reach into the front wheel house ahead of the front
wheel, remove the fastener, and lift the cover over the
access hole in the front of the wheel house splash shield.
Access to the rear of the lamp can be gained through this
access hole.
Splash Shield Access Cover
1 — Access Cover
2 — Fastener
Hide quick links:
Advertisement
Table of Contents
