Specifications - Siemens SITRANS LR200 Quick Start Manual

Safety Guidelines
Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING symbol relates to a caution symbol on the product, and means that
failure to observe the necessary precautions can result in death, serious injury,
and/or considerable material damage.
WARNING symbol, used when there is no corresponding caution symbol on the
product., means that failure to observe the necessary precautions can result in
death, serious injury, and/or considerable material damage.
: means important information about the product or that part of the operating manual.
Note
FCC Conformity
US Installations only: Federal Communications Commission (FCC) rules
WARNING: Changes or modifications not expressly approved by Siemens could void
the user's authority to operate the equipment.
Notes:
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a com-
mercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference to radio communications, in which case the user will
be required to correct the interference at his own expense.
SITRANS LR200
WARNING: SITRANS LR200 is to be used only in the manner outlined in this manual,
otherwise protection provided by the equipment may be impaired.
Note: This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based communications.
SITRANS LR200 is a 2-wire 6 GHz pulse radar level transmitter for continuous monitoring of
liquids and slurries in storage and process vessels including high temperature and pressure, to
a range of 20 m (66ft).
The device consists of an enclosed electronic circuit coupled to the antenna and either a
threaded or flange type process connection.
SITRANS LR200 supports PROFIBUS PA communication protocol, and SIMATIC PDM
software. Signals are processed using Process Intelligence. This device supports acyclic
communications from both a PROFIBUS Class I and Class II master.

Specifications

For a complete listing, see the SITRANS LR200 (PROFIBUS PA) Instruction Manual. For
Approvals information see
Page EN-2 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
Approvals
on page 3.
A5E32153438