Siemens SITRANS LR200 Quick Start Manual page 5

Ambient/Operating Temperature
Notes:
• Process temperature and pressure capabilities are dependent upon information on the
process device tag. The reference drawing listed on the tag can be downloaded from the
Siemens website at: www.siemens.com/LR200 under Support.
• Maximum temperature is dependent on the process connection, antenna materials, and
vessel pressure. See
Process Pressure Temperature derating curves are available in the full manual.
ambient temperature (surrounding enclosure)
–40 °C to +80 °C (–40 °F to +176 °F)
process temperature
PP rod:
–40 °C to +80 °C (–40 °F to +176 °F)
PTFE rod or SS horn:
–40 °C to +200 °C (–40 °F to +392 °F)
Power
General Purpose:
Intrinsically Safe:
Non-Sparking/Energy Limited:
Non-incendive:
• Bus powered
• Current consumed
Approvals
Notes:
• Refer to the device nameplate and the process device tag to check the approval rating of
your device.
• Use appropriate conduit seals to maintain IP or NEMA rating.
• General CSA
• Radio Europe (R&TTE), US (FCC), Canada (Industry Canada)
• Hazardous Intrinsically Safe
1)
Intrinsically Safe wiring
See
A5E32153438 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
Maximum Process Temperature Chart
Per IEC 61158-2 (PROFIBUS PA)
10.5 mA
, FM, CE, C-TICK
US/C
1)
(Europe)
(International) IECEx TSA 05.0009X Ex ia IIC T4
(US/Canada)
(Australia)
(Brazil)
on page 8.
on page 20, for more details.
device
nameplate
process
device tag
ATEX II 1 G, EEx ia IIC T4
FM/CSA: (barrier required)
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III T4
ANZEx Ex ia IIC T4
INMETRO DNV 12.0069X
Ex ia IIC T4 Ga
IP66/IP67/IP68
-40 ºC ≤ T a ≤ +80 ºC
DNV #OCP 0017
ABNT NBR IEC 60079-0:2008 e
ABNT NBR IEC 60079-11:2009
Page EN-3