Siemens SITRANS LR200 Quick Start Manual page 20

Update Electronic Device Description (EDD).
Notes:
• SIMATIC PDM Rev. 5.2 SP1 is supported only for basic configuration and troubleshooting.
• For advanced features such as the Quick Start wizard, Rev. 6.0 SP4 or higher is required.
• The EDD is located in Device Catalog, under Sensors/Level/Echo/Siemens/SITRANS
LR200.
• Check the product page of our website at: www.siemens.com/LR200 to make sure you
have the latest version of SIMATIC PDM, the most recent Service Pack (SP) and the most
recent hot fix (HF). Go to Support > Software Downloads.
To install a new EDD:
1) Download the EDD from the product page of our website at: www.siemens.com/LR200.
and save the files to your computer.
2) Extract the zipped file to an easily accessed location.
3) Launch SIMATIC PDM – Manage Device Catalog, browse to the unzipped EDD file and
select it.
Configuring a new device
1) Set Address via handheld programmer (default 126).
• In PROGRAM mode, navigate to: Level Meter > Communication (5)> Device Address (5.1).
• Press RIGHT arrow
mode.
• If required, key in a new value and press RIGHT arrow
the new value.
• Press Mode
2) Launch SIMATIC PDM and create a new project for LR200.
3) Upload parameters to the PC/PG.
4) Configure the device via the Quick Start wizard.
Quick Start Wizard via SIMATIC PDM
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click on
FINISH AND DOWNLOAD at the end of step 5 to save settings offline and transfer them to
the device.
• Click on BACK to return and revise a setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open
the menu Device – Wizard -
Quick Start, and follow steps
1 to 5.
Page EN-18 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
, RIGHT arrow
to return to Measurement mode.
, to open parameter view and enable Edit
to accept it. The LCD displays
Quick
Start
A5E32153438