Table of Contents
Advertisement
5 SEQUENCE INSTRUCTIONS
• A FEND instruction is executed during an interrupt program, and before the execution of an
IRET instruction.
• A FEND instruction is executed between the CHKCIR and CHKEND instructions.
• A FEND instruction is executed between the IX and IXEND instructions.
[Program Example]
(1) The following program uses the CJ instruction.
[Ladder Mode]
[List Mode]
Steps
Instruction
5 - 47
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
When XB is ON, jumps to label P23; from
P23, executes the next step
Executed when XB is OFF
Indicates the termination of the sequence
program when XB is OFF
Device
MELSEC-Q/QnA
(Error code: 4221)
(Error code: 4230)
(Error code: 4231)
5 - 47
Advertisement
Table of Contents
