Appendix; Table Of Preset Functions - Sony RM-VL1000 Operating Instructions Manual

Appendix

Table of Preset
Functions
Note
There may be some components or
functions that cannot be operated with
this Commander.
TV
KEY DISPLAY FUNCTION
POWER To turn the power on/
off
1 – 9, 0, ENT To change the channel
For example, to change
to channel 5, press 0 and
5 (or, press 5 and ENT)
TV/VIDEO To change the input
mode
DISPLAY To display the current
channel on TV
SLEEP To operate the SLEEP
function on the TV
(works only for a TV
with SLEEP function)
MENU To call up the MENU
display
To move the cursor
upward
To move the cursor
downward
To move the cursor to
the right
To move the cursor to
the left
OK (Joystick) To enter the selection of
the MENU display
GUIDE To exit the setting menu
PIP To turn on/off the
"window" picture
CH +/– Channel up: +
Channel down: –
RECALL To operate JUMP,
FLASHBACK or the
CHANNEL RETURN
function on the TV
depending on the setting
of the TV's manufacturer
VOL +/– Volume up: +
Volume down: –
MUTING To mute the volume on
the TV. Press again to
turn muting off.
PIP SWAP To swap the "window"
picture
PIP MOVE To move the location of
the "window" picture
74
KEY DISPLAY FUNCTION
PIP CH + To change the TV
channel in the
"window" picture
upwards
PIP CH – To change the TV
channel in the
"window" picture
downwards
PIPINPUT To change the input
mode of the "window"
picture
PIPSTILL To freeze the "window"
picture
PIP OFF To turn off the
"window" picture
MAIN/SUB To switch the sound of a
duplex broadcast
NORMAL To return the picture
and sound quality to the
default setting
AU MODE To select the sound
adjusting mode
PIC MODE To select the picture
adjusting mode
WIDE To switch to WIDE