Setting the Clock (continued)
2
Select "CLOCK" by
pressing the Label Select
button.
SET
The Commander enters clock
setting mode.
"CLOCK" and the current time
setting is displayed on the LCD
display.
The time mode (STD TIME or
DS TIME) currently set stays
lit, and the other flashes.
3
To change the time mode,
select the time mode which
flashes (STD TIME or DS
TIME) by pressing the
Label Select button.
SET
If it is not necessary to change
the time mode, press the
Joystick toward
to Step 4.
12
or , and go
4
Set the clock by pressing
the Joystick toward
or . Follow Steps 4 - 6 on
pages 9-10.
5
Press the SET button.
,
,