Sony RM-VL1000 Operating Instructions Manual page 32

Controlling the Volume of Visual
Components Connected to an
Audio System (continued)
5
Select the component of
which the volume setting
you want to change ( in this
case, AMP) by pressing the
Label Select button. (To
change the labels, press the
SCROLL button.)
With a beep sound, the volume
control setting of visual
components is switched to the
amplifier.
COMPO
SET
R
R
R
If you want to change the
volume setting of other
components, repeat Steps 4
and 5.
6
To change the volume
control setting of audio
components (AMP, CD,
MD/DAT, TAPE A and
TAPE B), select the
component set to audio (in
this case, AMP) by pressing
the Label Select button.
SET
32
The component names are
displayed on the labels. To
change the labels, press the
SCROLL button.
The components with a preset
code number beginning with
"4" (amplifier) flash.
COMPO
SET
7
Select the component of
which volume setting you
want to change (in this case,
AMP) by pressing the Label
Select button. (To change
the labels, press the
SCROLL button.)
With a beep sound, the volume
control setting of audio
components is switched to the
amplifier.
COMPO
SET
R
R
R
If you want to change the
volume setting of other
components, repeat Steps 6 and
7.