Executing a Series of Commands
— System Control Functions
(continued)
Changing the interval
between operation steps
You can control the interval from
150- 900 ms.
1
Keep the SET button
pressed for more than a
second.
2
Press the SCROLL button
twice to display
"SYSDELAY" on one of the
labels.
3
Select "SYSDELAY" by
pressing the Label Select
button.
SET
4
Select "INTERVAL" by
pressing the Label Select
button.
SET
42
The current interval setting
stays lit. The factory setting is
150 ms. (ms: 1/1000 second)
5
Select the interval by
pressing the Label Select
button.
SET
With a beep sound, the setting
is changed.
SET
6
Press the SET button.
The display returns to Step 4.