Changing The Program Already Set Or Changing Another Program That You Select - Sony RM-VL1000 Operating Instructions Manual

Integrated remote commander
Hide thumbs Also See for RM-VL1000:
Table of Contents

Advertisement

Setting the Timer (continued)
To change the name of the
Timer Macro labels on the
display
You can change the display of the labels
on the display to the most suitable
name using up to 8 characters or digits.
1 In Step 4 (page 52), select the Timer
Macro label of which name you
want to change (for example,
PROG4) by keeping the Label Select
button pressed for more than 2
seconds.
The Commander enters the Label
Input mode.
SET
2 Input the name of the label.
Follow Steps 3 - 5, on page 27 - 28.
3 Press the SET button.
The display goes to Step 5 on page
52.
56
Changing the program
already set or changing
another program that you
select
1
Follow Steps 1 - 4 on page
51- 52.
2
Select "COPY" by pressing
the Label Select button.
If you want to change the
program already set, go to Step
5 without pressing the COPY
key.
SET
The program numbers appear.
Numbers which have the timer
setting information flashes. The
others stay lit.
3
Press the SCROLL button
repeatedly until the
program number (PROG 1-
12) of which the contents
you want to change
appears.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-vl1000/b

Table of Contents