Sony RM-VL1000 Operating Instructions Manual page 45

The display of the component
names (preset by Sony) for
which you can program the
Power-on signal flashes. The
display of the other
components stays lit.
4
Select the desired
component by pressing the
Label Select button.
(To change the labels, press the
SCROLL button repeatedly. )
SET
The selected component name
appears at the bottom of the
LCD display.
A beep sound is heard, and
"ON" lights.
SET
The display returns to Step 4.
If you select a component
for which the Power-on
signal cannot be
programmed
"NG" appears and the 'NG' sound
is heard twice. And the display
returns to Step 4.
5
Press the SET button.
The display returns to the
previous one.
To clear the Power-On command
Follow the same procedure as
Steps 1- 5 on pages 44- 45.
The selected component name
appears on the bottom of the LCD
display. A beep sound is heard,
and "OFF" lights.
SET
Note
If the component code of a non-Sony
product has been set for a component
label, you cannot program the Power-
On function for it.
45