Assembly Instructions; X3 Classic & X3 Sport X3R - Bat-caddy X3 Series User Manual

ASSEMBLY INSTRUCTIONS

There is a video on how to assemble your X3 Series cart on the website under Product Info > Tech Tips
1. Unpack all items carefully and check inventory. Place frame structure (one piece) on soft and
clean ground to protect frame from being scratched
2. Attach Rear wheels to axles by sliding locking lever on the wheel hub to the right, opening
the internal lock. Inserting the axle into the wheel. Make sure to keep the locking lever in the
open position during this process (Pic. 1). Then insert the axle all the way onto the
wheel (Pic. 2). Align the axle pins so they fit into the inner core of the wheel (Pic. 3)
Then release the lever and let the wheel lock into the groove on the front of the axle to secure
it in place. If not locked in, the wheel will not be connected to the motor and will not be
propelled or even come off! Test the lock by trying to pull the wheel out. To disassemble the
wheels, proceed in reverse order.
Pic-1
ATTENTION:
Make sure that the right wheel (marked R) is attached to the right side and the left
wheel (marked L) to the left side (seen from behind the cart in driving direction), as the wheels have
built-in one-way clutches. The caddy will not move if the wheels are not on the proper side.
3. Erect Frame by first unfolding the u-shaped frame piece (Pic 1). Bring up the frame piece with the
main hinge attachment and first attach bottom of the hinge to the outside of the pin on the top of
the u-shape frame (Pic 2). Open the top frame and with the hinge lever attach it to the inside of
the pin locking the entire joint together (Pic 3). Proceed in reverse for folding the caddy.
Pic-1
4. Insert Anti-tip Wheel into frame holding bar and secure with pin.
X3 Classic, X3 Sport, X3R
Pic-2
Pic-2
6
Pic-3
Pic-3