Additional Functions; Testing Your Caddy; Remote Control Instructions (X3R Only) - Bat-caddy X3 Series User Manual

Additional Functions

Tracking Adjustment:
weight distribution on the caddy and slope/topography of the golf course. Test your caddy's tracking
behavior by operating it on an even surface without the bag.
If changes are necessary, you can adjust the
tracking of your caddy by loosening the front
wheel axle and shifting the front wheel as
needed. After adjustment, fasten screws in
reverse order. Note: DO NOT over tighten the nuts.
Note: There is a video on the website under
"tech tips" that shows how to adjust tracking
Note: There is a video on the website under "tech tips" that shows how to adjust tracking
Braking System:
The caddy drive train is designed to keep the wheels engaged with the motor, thus acting as a
brake that will control the caddy's speed while going downhill.

Testing Your Caddy

Test Environment
First, make sure that you perform your first test of the caddy in a wide and safe area, free of obstruc-
tions or valuables, such as people, parked automobiles, flowing traffic, furniture or water bodies (riv-
ers, swimming pools etc.), Steep hills, cliffs or similar hazards.
Manual Control Operation
Test the manual function first: Press the On/Off button for 2-5 seconds. The manual functions of the
caddy are controlled through the rheostat control wheel on the top of the handle. Pushing the wheel
clockwise will control the forward movement of the caddy. In order to slow down or stop the caddy,
turn the wheel counterclockwise.
Remote Control Operation
Make sure you are close to the caddy at all times while testing it and familiarizing yourself
with the remote control! Now turn on the main power switch and make sure that the rheostat control
wheel is in OFF position. One touch of the Forward/Backward arrows on the remote control starts the
caddy in either direction. Further pushes increase the speed.
In order to stop the caddy, press round red STOP button in the middle of the remote! To turn
the caddy in either direction while moving, push the left or right arrows briefly. Once you release
the button the caddy will continue in the current direction at the same speed prior to the turning
command. You will notice that the caddy reacts differently on different surfaces, so it will take some
practice to get just the right touch for turning maneuvers. The remote is designed to have a reach of
approximately 80-100 yards, but we strongly recommend to operate the caddy in closer ranges of
10-30 yards (not exceeding 50 yards) to be able to react to any unforeseen events, such as other
golfers crossing your path or to avoid hidden obstructions (creeks, bunkers, GUR, etc.) or an unex-
Tracking behavior of all electric caddies is strongly dependent on equal
(X3R Only)
AXLE ADJUSTMENT
10