Assembly Instructions; X3 Classic & X3 Sport, X3R - Bat-caddy X3 Series User Manual

ASSEMBLY INSTRUCTIONS

There is a video on how to assemble your X3 Series cart on our website
(support.batcaddy.com)
1. Unpack all items carefully and check inventory. Place frame structure (one piece) on soft
clean ground to protect the frame from being scratched.
2. Attach rear wheels to axles by sliding the locking lever on the wheel hub to the right, opening
the internal lock. Insert the axle into the wheel. Make sure to keep the locking lever in the
open position during this process (Pic-1). Then insert the axle all the way onto the wheel
(Pic-2). Align the axle pins so they fit into the inner core of the wheel (Pic-3). Release the
lever and let the wheel lock into the groove on the front of the axle to secure it in place.
If not locked in, the wheel will not be connected to the motor and may come off. Test the
lock by trying to pull the wheel out. To disassemble the wheels, proceed in reverse order.
Pic-1
ATTENTION:
X3 Classic & X3 Sport
Make sure that the right wheel (marked R) is attached to the right side and the left wheel
(marked L) to the left side (seen from behind the cart in driving direction), as the wheels have
built-in one-way clutches. The caddy will not move if the wheels are not on the proper side.
3. Erect the frame by first unfolding the u-shaped frame piece (Pic-4). Bring up the frame
piece with the main hinge attachment and first attach bottom of the hinge to the outside of
the pin on the top of the u-shape frame (Pic-5). Open the top frame and using the hinge
lever, attach it to the inside of the pin locking the entire joint together (Pic-6). Proceed in
reverse for folding the caddy.
Pic-4
X3 Classic, X3 Sport, X3R
Pic-2
Pic-5
6
Pic-3
Pic-6