Operating Instructions; T-Handle Control Functions; X3 Classic, X3 Sport & X3R - Bat-caddy X3 Series User Manual

OPERATING INSTRUCTIONS

X3 Series
T Handle Controls
X3 Classic Instructions
On the handle the top red button is your ON/OFF switch which powers up & turns off power to cart.
The "lightning bolt"
The speed control (rheostat) dial on the side of the handle rotates to sets the speed
desired. Clockwise increases the speed, counterclockwise reduces the speed.
The green button
to stop the cart at the current speed. When you are ready to resume just press the button again and
the cart will return to the last speed set. This option saves you from turning the speed dial back to
zero and re-setting the speed control (Rheostat) each time.
The X3 classic does not have a USB port or the Advance Distance Timer.
X3 Sport Instructions
The top red button has a dual function.
1. It is the ON/OFF BUTTON controls the caddy's power supply. Press and hold for ca. 3-5
seconds
in order to switch the caddy ON or OFF. A small light under the "lightning bolt"
indicate power is "ON".
2. STOP/GO BUTTON. Once the cart is powered up, you can use the power button in
conjunction with the speed dial (Rheostat) to stop the cart at the current speed and then
resume at that speed once you resume walking without resetting the rheostat. Set you desired
speed with the rheostat, when you want to stop, press the power button for one second and
the caddy will stop, press again caddy will resume at the same speed.
Speed Control Dial (Rheostat)
The Speed Control Dial (Rheostat) is located on the side of the upper frame
adjacent to the control panel. It should be in the off position to start. Rotating it
to the right (clockwise) will start your speed.
X3 Classic - X3 Sport - X3R
will light up indicate power is "ON".
is our stop/go feature. It works with the speed control allow you
X3 Classic
Faceplate
8
X3 Sport/X3R
Faceplate
Slow Fast
will light up