Installing/Removing The Access Panel - HPE D8000 Manual

2. Verify that each of the four lift handles is securely fastened to the physical enclosure before performing the
lift. Personal injury or damage to the equipment could result if the physical enclosure is lifted with the lift
handles not securely fastened.
3. With two persons positioned one on each side of the physical enclosure, grip the lift handles securely and
lift the physical enclosure using appropriate lifting technique.

Installing/Removing the Access Panel

IMPORTANT: A minimum of three people are required to lift the physical enclosure with the removable
handles, with at least one person on each side of the enclosure.
Procedure
• To remove the access panel:
1. Open the latch in front of the access panel by rotating it towards the bottom of the physical enclosure.
2. Depress the expose access panel tab.
3. With the access panel tab depressed, rotate the access panel up by lifting the lift tab labeled "LIFT
HERE." Grasp the access panel and gently lift it off the physical enclosure.
4. The procedure is the same for both access panels.
2
1
2
1
Mechanical best practices 15