Installing The Physical Enclosure - HPE D8000 Manual

b. Using 2 M5 screws, secure the rear of the rack rail to the rack. Complete for both the left and right rack
rails.

Installing the Physical Enclosure

Do not use the lifting straps and removable handles to install the physical enclosure into the rack. Due to the
physical enclosure's size and weight, use a pneumatic lift to install the enclosure. Using a pneumatic lift
allows for more stable alignment of the physical enclosure to the rack rails, preventing damage to the inner
rack rail member on the physical enclosure.
CAUTION: The D8000 rack rail must be properly secured in the rack. Improper installation may result in
damage to the equipment or personal injury.
To install the physical enclosure in the rack:
8 Best practices for rack installation
2
1
2