HPE D8000 Manual page 16

• To install the access panel:
1. Ensure that the access panel latch is in the open position.
2. While facing the front of the physical enclosure, carefully align the mounting features at the rear of the
access panel with the mounting pins at the rear of the enclosure.
3. With the access panel mounting features engaging the physical enclosure mounting pins/slots, slowly
rotate the access panel down into place onto the physical enclosure.
4. Gently but firmly press the top of the access panel to ensure that the access panel tab locks into place.
5. Close the access panel latch by rotating it up until it "clicks" into place.
16 Mechanical best practices