HPE D8000 Manual page 12

Table 1: Rack Mounting Options
Form Factor
0U (Vertical)
1U
2U
For more detailed information regarding PDUs, see the following guides:
Table 2: Documentation List
Document
QuickSpecs
HPE Basic Power Distribution Units
QuickSpecs
HPE G2 Metered Power Distribution
Units QuickSpecs
HPE G2 Switched Power Distribution
Units QuickSpecs
HPE G2 Metered and Switched Power
Distribution Units QuickSpecs
Install/User Guides
HPE G2 Series Basic Power Distribution
Unit User Guide
HPE G2 Series Metered, Switched, and
Metered & Switched Power Distribution
Unit User Guide
Support Matrices / Technical Data Sheets
HPE G2 Basic Power Distribution Units
(PDU)
12 Best practices for rack installation
Details
Vertical PDUs come in Half, Mid, & Full-height versions and install vertically in the 0U
space in the back of the rack. There are also Half and Full-height high-density models
that install vertically in the 0U space in the back of the rack. The high-density model
mounts on its side with outlets facing the back of the rack.
• Half-height PDU—Designed to fit in a 22U and taller rack.
• Mid-height PDU—Designed to fit in a 36U and taller rack.
• Full-height PDU—Designed to fit in a 42U and taller rack.
1U PDU can be installed in a U position in the rack, or in the true 0U space on the side
of the rack between the RETMA rails.
2U PDUs can be installed in a U position in the rack.
Available at:
https://psnow.ext.hpe.com/doc/PSN1009694917WWEN.pdf
https://h20195.www2.hpe.com/v2/GetDocument.aspx?
docname=a00002908enw
https://h20195.www2.hpe.com/v2/getdocument.aspx?
docname=a00002909enw
https://h20195.www2.hpe.com/v2/GetDocument.aspx?
docname=a00002910enw
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-
c05333389-2.pdf
https://support.hpe.com/hpsc/doc/public/display?
sp4ts.oid=1010309528&docLocale=en_US&docId=emr_na-
a00006907en_us&withFrame
https://h20195.www2.hpe.com/V2/GetDocument.aspx?
docname=4AA6-8687ENW
Table Continued