Table of Contents
Advertisement
Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ45 jack)
ZONE 2 VIDEO OUT (RJ45 jack) is used only for custom installation by a qualified person.
ZONE 2 VIDEO OUT (RJ45 jack) is a jack that sends a source video signal to the component video
input for zone 2. For details, consult your dealer.
Note
This jack is not for an Ethernet LAN connection.
ZONE 2 VIDEO OUT (RJ45 jack) connection
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
ZONE 2 VIDEO OUT
(RJ45 jack)
Note
CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and may void your
warranty.
RJ45 Video Pinout
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
Component Video Balun
CAV-CVB1
CAT5 cable
Pinout
A Pin 1
BLUE/Pb (R)
B Pin 2
BLUE/Pb (T)
C Pin 3
GREEN/Y (R)
D Pin 4
GND
E Pin 5
+11V
F Pin 6
GREEN/Y (T)
G Pin 7
RED/Pr (R)
H Pin 8
RED/Pr (T)
Component video
cable
Wire color
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
Zone 2
TV
monitor
continued
91
GB
Advertisement
Table of Contents
