Switching The Zone Setting Of The Remote - Sony STR DA6400ES Operating Instructions Manual

Switching the zone
setting of the remote
The remote commanders are initially set to be
used in zone 2. If you want to use them in zone
3, switch the zone setting of the remote.
Main remote
RM SET
UP
SHIFT
Zone 2/Zone 3 remote
RM SET
UP
SHIFT
On the main remote commander
1
Press ?/1 while pressing RM SET UP.
The AMP and ZONE buttons flash.
2
Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT button
lights up.
94
GB
3
Press the numeric button 2 for the
zone 2, or 3 for the zone 3 while the
ZONE button is flashing.
The ZONE button lights up.
4
Press ENT/MEM.
The ZONE button flashes twice and the
remote switches to zone 2 or zone 3 mode.
On the zone 2/zone 3 remote
commander
?/1
1
Press ?/1 while pressing RM SET UP.
The RM SET UP button flashes and the
AMP
SHIFT button lights up.
ZONE
2
Press the numeric button 2 for the zone
2, or 3 for the zone 3 while the RM SET
2, 3
UP button is flashing.
The RM SET UP button lights up.
3
Press ENTER.
ENT/
The RM SET UP button flashes twice and
MEM
the remote switches to zone 2 or zone 3
mode.
?/1
2, 3
ENTER