Page 2
‘BRAVIA’ Theatre Sync To use ‘BRAVIA’ Theatre Sync, set the HDMI CONTROL function as explained below. By connecting Sony components that are compatible with the HDMI CONTROL function with a HDMI cable (not supplied), operation is simplified as below: • One-Touch Play: When you play back a...
Page 3
To one of the COAXIAL IN jacks Audio signals A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Optical digital cord (not supplied) a)b) C Coaxial digital cord D Audio cord (not supplied) Connect to at least one of the audio cords (B, C or D).
For details on setting the TV and connected components, see the operating instructions of the respective components. Make sure that the receiver is connected to the TV and components (compatible with HDMI CONTROL function) via HDMI connection. Turn on the receiver, TV and connected components.
Watching a DVD by simple operation You can also select a connected component, such as a DVD/Blu-ray Disc Player using the TV menu. In this case, the receiver and the TV switch to the appropriate HDMI input. Enjoying the TV sound from the speakers...
RM-AAP016/ RM-AAP017 RM-AAU014/ RM-AAU015/ RM-AAU017 You can also use the receiver’s remote to turn off the TV. (For remote RM-AAP016/ RM-AAP017 only) Press TV, then press AV ?/1. (For remote RM-AAU014/ RM-AAU015/RM-AAU017 only) Press TV and TV ?/1 at the same time.
“Preparing for HDMI CONTROL function” (page 4). No sound is output from the receiver and TV speaker while using the System Audio Control function. • Make sure the TV is compatible with the System Audio Control function.
Page 8
Pour utiliser ‘BRAVIA’ Theatre Sync, réglez la fonction HDMI CONTROL ainsi qu’il est décrit ci-dessous. En raccordant les appareils Sony compatibles avec la fonction HDMI CONTROL au moyen d’un câble HDMI (non fourni), le fonctionnement est simplifié de la façon suivante : •...
Page 9
COAXIAL IN Signaux audio A Câble HDMI (non fourni) Il est recommandé d’utiliser un câble HDMI Sony. B Cordon numérique optique (non fourni) C Cordon numérique coaxial D Cordon audio (non fourni) Raccordez-le à au moins l’un des cordons audio (B, C ou D).
Pour activer HDMI CONTROL (Pour la télécommande RM-AAP016/ RM-AAP017 uniquement) Appuyez sur RECEIVER, puis sur MENU. Le témoin RECEIVER s’allume et l’ampli-tuner est activé. « 1-LEVEL » apparaît sur l’afficheur. (Pour la télécommande RM-AAU014/RM-AAU015/ RM-AAU017 uniquement) Appuyez sur AMP MENU.
émis pendant quelques instants. Remarques pour les modèles autres que le STR-DG910 • Lorsque que vous sélectionnez une autre entrée que l’entrée HDMI ou que l’entrée TV, la fonction Contrôle audio du système est automatiquement désactivée.
Page 12
Mise hors tension de l’ampli-tuner avec le téléviseur (System Power Off) Lorsque vous mettez le téléviseur hors tension à l’aide de la touche POWER de la télécommande du téléviseur, l’ampli-tuner et les appareils raccordés s’éteignent automatiquement. RM-AAP016/ RM-AAP017 RM-AAU014/ RM-AAU015/ RM-AAU017 Vous pouvez également utiliser la télécommande de l’ampli-tuner pour mettre le...
Dépannage Si l’un des problèmes suivants survient pendant l’utilisation de la fonction HDMI CONTROL, reportez-vous à ce guide dépannage pour résoudre le problème. La fonction HDMI CONTROL ne fonctionne pas. • Vérifiez le raccordement HDMI (page 3). • Vérifiez que « CONTROL » est réglé sur «...
Need help?
Do you have a question about the STR-DG910 and is the answer not in the manual?
Questions and answers