Download  Print this page

Switching Between Digital And Analog Audio - Sony STR DA6400ES Operating Instructions Manual

Multi channel av receiver.
Hide thumbs

Advertisement

Switching between
digital and analog audio
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
102
GB
1
Press the input button.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP.
3
Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears on
the TV screen.
• Auto
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
AMP
analog audio signals are selected.
• Analog
Specifies the analog audio signals input
Input
to the AUDIO IN (L/R) jacks.
buttons
Notes
• Some audio input modes may not be set up
depending on the input.
• When either HDMI input, satellite tuner or
DIGITAL MEDIA PORT adapter is selected,
"------" appears on the display, and you cannot
select other modes. Select an input mode other than
the HDMI input, satellite tuner and DIGITAL
MEDIA PORT adapter then set the audio input
mode.
• When "2ch Analog Direct" is being used, or the
multi-channel input is selected, audio input is set to
"Analog." You cannot select other modes.
INPUT
MODE

Advertisement

Table of Contents

   Related Manuals for Sony STR DA6400ES

This manual is also suitable for:

Str-da6400es

Comments to this Manuals

Symbols: 0
Latest comments: