Table of Contents
Advertisement
Operating the receiver
from another zone
(ZONE 2/ZONE 3 operations)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
?/1
ZONE
Input
buttons
V/v/b,
MENU
MASTER
VOL
Operating the receiver from
zone 2
1
Turn on the main receiver (this
receiver).
2
In the case of illustration 1-2
(page 89), turn on the amplifier
in zone 2.
3
Press ZONE.
The remote switches to zone 2.
4
Press ?/1.
The zone function is activated.
5
Press MENU.
The menu is displayed on the TV screen.
6
Press V/v to select “
Input,”
or b.
then press
7
Press V/v to select the input
source you want, then press
.
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
8
Adjust to a suitable volume.
• In the case of illustration 1-1
(page 89), adjust the volume using
MASTER VOL +/– on the remote.
• In the case of illustration 1-2
(page 89), adjust the volume using the
receiver in zone 2.
To finish the zone 2 operation
Press ?/1 after pressing ZONE.
Page 95
GB
Advertisement
Table of Contents
