Download  Print this page

Sony STR DA6400ES Operating Instructions Manual Page 117

Multi channel av receiver.
Hide thumbs

Advertisement

from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Press V/v to adjust "Level:," then press
.
To output the source sound
from adjacent speakers
You can output the source sound from adjacent
speakers so that you can adjust the balance
between the speakers.
1
Press B/b to select "Phase Audio," then
press
.
The Phase Audio screen appears.
2
Press V/v to adjust the parameter, then
press
.
• OFF
• L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/
SBR, SBR/SBL, SR/SB, SBL/SL, SB/
SL, SL/L, L/SR
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Press V/v to adjust "Level:," then press
.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker displayed on the
screen
The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
D. Range Comp (Dynamic range
compressor)
Lets you compress the dynamic range of the
soundtrack. This may be useful when you want
to watch movies at low volumes late at night.
Dynamic range compression is possible with
Dolby Digital sources only.
x OFF
The dynamic range is not compressed.
x AUTO
The dynamic range is compressed
automatically.
x STD
The dynamic range is compressed as intended
by the recording engineer.
x MAX
The dynamic range is compressed
dramatically.
Tips
• Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
• "STD" is the standard setting, but it only enacts
light compression. Therefore, we recommend
using the "MAX" setting. This greatly compresses
the dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
compression.
117
GB

Advertisement

Table of Contents

   Related Manuals for Sony STR DA6400ES

This manual is also suitable for:

Str-da6400es

Comments to this Manuals

Symbols: 0
Latest comments: