Output Log / Delete Log - Optex Accurance-3D A3001CB Instruction Manual



Output log / delete log

This product records authorization logs with capture data.
<Note>
As capturing video is heavy load do not set it unless necessary.
Logging Setting
Select 'Capture' or 'Still' both for PRIMARY and SECONDARY, and select the output result "Zero" "One"
"More" "Sus" to be recorded.
When wishing to record the number of outputs, select 'Output counts (csv.)'.
<Note> The logging is stopped automatically when;
-The memory of SSD is full.
-The temperature of Control Box becomes high.
The log can be output to an external device via the USB ports on Control Box.

Cancel Log
Cancel the setting of Log as described in 1. Ready to Log.

Select Log
Select the output logs to be copied from Files as shown on the screen.
Connect external memory to USB port on the Control Box.
After connecting external memory, click 'Search' button at Drive section on the screen.
When the memory device is recognized, the memory information is shown at Dst:.
Src: shows the capacity of output Log, confirm the capacity of the external memory as shown Dst:.

Output Log
After confirming the capacity of memory is enough for the capacity of output log, click 'Copy' at the
bottom right on the screen.
Please wait until finish output Log.

Remove External Memory Device
When completing output of the Log, click 'Eject' inside of Drive on the screen.
When the memory device is disconnected, remove the device.

Delete Log
Select output log from 'Files', and click 'Delete' at bottom right on the screen.
42