Table of Contents
Advertisement
Before your operation
Read this instruction guide carefully prior to installation and operation.
After reading, store this guide carefully in an easily accessible place for reference.
Pictorial indication
This guide uses the following warning indications for correct use of the project, harm to you or other people
and damage to your assets, which are described below. Be sure to understand the description before
reading the rest of this guide.
CAUTION
This symbol represents important notes
This symbol indicates prohibition.
This symbol indicates mandatory actions.
Document disclaimer
Please read carefully the following instructions for installation, wiring and setting.
WARNING
WARNING
Failure to follow the instruction guide provided with this indication and improper
handling may cause death or serious injury.
Failure to follow the instruction guide provided with this indication and improper
handling may cause injury and/or property damage.
Follow the instructions below to reduce the risk of fire or electrical shock.
Do not turn on the power during installation.
Connect wires into the terminal blocks firmly. If the connection is not firm
or comes off, it may cause a fire.
Do not use the products beyond the specifications on power or power
consumption. If the product is in use under such irregular environment, it
may cause a fire or electric shock.
Stop using the product when there is smoke or a strange smell coming
from it or when it fell down or damaged.
Do not use the products beyond the specifications; otherwise, it may
cause a fire or electric shock by a short circuit or heat.
Do not wash or insert anything into the product.
Do not put anything over the product in use. It may generate heat and
burn the inside; therefore, it may cause a fire or electric shock.
Never attempt to disassemble or repair the product.
It may cause fire or damage to the devices.
To reduce the risk of injury
Check if the products (detection unit and control box) are mounted firmly
and periodically. If the mounting plate or screws rust, those may fall of and
injure a person(s).
Do not touch the unit base or power terminals of the product with a wet
hand (do not touch when the product is wet with rain, etc.).
It may cause electric shock.
i
Advertisement
Table of Contents
