Useful Tips; Maintenance And Cleaning; Technical Specifications - Pro-Ject Audio Systems X2 Instructions For Use Manual

13.

USEFUL TIPS

The lid is not only a dust cover but also a resonant structure likely to be excited by and to pass into the
plinth the acoustic energy emanating from your loudspeakers during replay. Therefore it is
recommended to remove the lid for achieving a better sound quality. The record player should be
positioned on a low-resonance surface, like wood or multiple layer ply board to avoid structural
vibrations disturbing replay.
14.

MAINTENANCE AND CLEANING

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this will create static electricity which attracts even more
dust! Antistatic cleaning fluids are available at specialized stores but must be applied sparingly to
avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance
to avoid damage.
If the player is not used over a long period of time, the drive belt should be removed to prevent unequal
stretching.
Always disconnect the record player from the mains power supply as a precaution before
maintenance!

TECHNICAL SPECIFICATIONS

X2
Pro-Ject 9'' Carbon/Alu sandwich tonearm
Nominal speeds
Speed variance
Wow and flutter
Signal to noise
Effective tonearm mass
Effective tonearm length
Overhang
Power consumption
Outboard power supply
Dimensions (W x H x D)
Weight
10
© Pro-Ject Audio Systems · Pro-Ject X2 · Revision 2019.08.06
33/45/78 r.p.m.
33: ±0.25 % 45: ±0.20 %
33: ±0.12 % 45: ±0.10 %
-70dB
13.5g
9 " (230mm)
18mm
5W/ 0.3W standby mode
15V/ 0.8 A DC, universal power supply
460 x 150 x 340mm, dust cover open 460 x 415 x 435mm
10 kg