Table of Contents
Advertisement
11.
ADJUSTING THE AZIMUTH
The cartridge needle must be vertical in the record groove in order to trace the groove wall modulations
correctly.
A small screw at the bearing end of the arm allows incorrect azimuth to be corrected.
Slacken off the screw just enough to be able to revolve the arm tube without applying force. Note! Do not
remove this screw completely!
12.
USEFUL TIPS
The lid is not only a dust cover but also a resonant structure likely to be excited by and to pass into the plinth
the acoustic energy emanating from your loudspeakers during replay. Therefore it is recommended to
remove the lid for achieving a better sound quality. The record player should be positioned on a low-
resonance surface, like wood or multiple layer ply board to avoid structural vibrations disturbing replay.
13.
MAINTENANCE AND CLEANING
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic
cloth. Never use a dry cloth because this will create static electricity which attracts even more dust! Antistatic
cleaning fluids are available at specialized stores but must be applied sparingly to avoid damage to rubber
parts. It is recommended to fit the needle cover before cleaning or maintenance to avoid damage.
If the player is not used over a long period of time, the drive belt should be removed to prevent unequal
stretching.
Always disconnect the record player from the mains power supply as a precaution before maintenance!
© Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28
11
Hide quick links:
Advertisement
Table of Contents
