Pro-Ject Audio Systems X2 Instructions For Use Manual page 5

Hide thumbs Also See for X2:

Table of Contents

Dear music lover,

Thank you for purchasing a Pro-Ject Audio Systems record player.

In order to achieve maximum performance and reliability, please study these instructions carefully.

Warning of a hazard for the user, the unit or possible misuse

Important notice

The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a

different model at a later date.

During assembling and adjustment small parts could be lost if they are not carefully placed in a

suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above which

are correspondingly numbered in the technical drawings above.

Safety instructions

The power supply is used to connect and disconnect the unit from the mains. Make sure that the

plug is easily accessible at all times. Hold the plug when unplugging the power cord. Never

handle the power cord while your hands are wet or damp.

Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase,

on or near the device. Never spill any liquid on the device. Never place any naked flame sources,

like lighted candles, on or near the device. The product shall not be used in damp or wet locations,

next to a bathtub, sink, swimming pool or any other similar conditions.

Keep plastic bags away from children to prevent any risk of suffocation.

The turntable was shipped partially disassembled in order to avoid damage to sensitive parts.

Please check immediately to make sure that neither the packaging nor the device was

damaged in transit.

Table of Contents

Show Quick Links

Table of Contents