Aligning The Button Clamp - Pfaff 3371-10 SERIES Adjustment Manual

Adjustment
15

Aligning the button clamp

.08
● Insert gauge button 1 (part number 61-111 635-66) and switch on the machine.
● In the input mode select parameter "609", see Chapter 11.03 Parameter input of the
● If necessary, enter the access code, see Chapter 11.05.01 Entering the access code in
● Adjust button clamp 2 (screws 3) in "X and Y direction" in accordance with the
● Conclude the input, remove the gauge button and switch off the machine.
7
Requirement
The button clamp should be aligned in "X" and "Y" direction, so that the needle penetrates
the centre of the gauge button.
1
Fig. 15 - 03_a
instruction manual (machine moves to "0-position").
the instruction manual.
requirement.
2
3