Mailbox; Other Configurations; Receiving Calls - Siemens Profiset 3020 User Manual

: Enter the operator code (1 to 6 digits)
Press the MENU key
Note:
The operator code is only valid in the
countries where this service is available.

Mailbox

You can use the MAILBOX
14 on page 5) to program the access
number of your mailbox:
Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
option
Use the DIAL/SELECT key to s elect
the MAILBOX option
Enter the access number of your
:
mailbox (max. of 16 digits)
Press the MENU key
( )
provided you have purchased the Mailbox
*
service from your local operator

Other configurations

There are other configurations that can be
accessed by using the PREFERENCES
option, as is shown by the following:
Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
option
( )
* key (position
10
Use the DIAL/SELECT key to s elect
the PREFERENCES option
Enter one of the codes below
depending on the desired option:
• 11 250 ms flash time
• 12 375 ms flash time
• 13 600 ms flash time
• 14 100 ms flash time
• 21 2 seconds pause time
• 22 3 seconds pause time
• 23 3.6 seconds pause time
• 24 1 second pause time
:
• 31 enables check for repeated
calls
• 32 disables check for repeated
calls
• 51 erase the list of outgoing calls
• 52 erase the list of received calls
• 99 returns to the default
configuration
Press the MENU key

Receiving calls

When you receive a call, the telephone will
emit a warning tone with the melody and
the volume selected. To answer the call, lift
the handset. If you have purchased the Call
Identification service
operator, the display will show information
about the caller (see Call Identification on
page 13).
Note:
To receive call identification information, do
not answer the telephone before the
second ring.
from your local