Cab-1 Remote Controller Commands For Your Boom Car And Crane Car - Lionel Boom Car Owner's Manual

CAB-1 Remote Controller commands for your Boom Car and Crane Car

U
se your CAB-1 Remote Controller to activate the sounds and operate the crane. To silence
the sounds, lift off the Boom Car's roof and slide the SOUND switch to the NO SND
position. Use the volume control knob located under the roof to adjust the volume. Refer to
Figure 1 on page 3 for the location of these controls.
Note! For continuous operation of the crane sounds, you must install a nine-volt alkaline
battery. See page 7.
Rotates the cab in either direction. Cab rotation sounds.
Releases the front ElectroCoupler on the Crane Car.
Coupler release sounds.
Releases the rear ElectroCoupler on the Crane Car.
Coupler release sounds.
Raises the boom. Boom sounds.
Raises the main hook. Winch sounds.
Lowers the boom. Boom sounds.
Lowers the main hook. Winch sounds.
4