Trainmaster Command Control Operations; Cab-1 Remote Controller Commands - Lionel LionChief Plus 2.0 GP20 Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller commands

T
he CAB-1 Remote Controller commands are detailed below. The corresponding RailSounds
sound system effects are in italic type.
Releases the ElectroCoupler on the rear of the
engine. Coupler release sound.
Activates the numeric keypad.
Short steam release sound.
Controls switch direction. Toggles all lights on/off,
except lights that are wired to track power.
Accelerates the locomotive with a clockwise
rotation. Decelerates the locomotive with a
counter-clockwise rotation. Speed-dependent
chuffing sounds. DynaChuff dynamic chuffing effect.
Activates the locomotive's whistle. Release the
button to discontinue the sound. Whistle sound
with steam effect.
Toggles the bell sound on and off.
Bell sound.
Changes the locomotive's direction. The locomotive
decelerates to a stop and continues in the opposite
direction when you increase the throttle. Air release
sound.
Increases the locomotive's speed while the button is
pressed. Release the button to return to the initial
speed. Labored chuff.
Decreases the locomotive's speed while the button is
pressed. Squealing brake sounds.
Shuts down all PowerMasters on your railroad. Stops
all TrainMaster Command Control-equipped
locomotives in operation. Use HALT only in
emergency situations.
Odyssey II Momentum
L 32 speed steps with low
M 100 speed steps with low
H 100 speed steps with medium
28
SET L M H
momentum
momentum
momentum